The Rane TTM57SL brings together the now industry standard digital manipulator with the class act of the rane turntablist mixers.

This mixer is in store to demo and available to hire from our Edinburgh showroom.

The TTM 57SL combines all the performance and features of the Rane TTM 56 with Serato Scratch LIVE software. On top of that they also included internal effects with six stereo insert points.

The TTM 57SL comes with two pieces of control vinyl, two control CDs, Scratch LIVE software including the VIDEO-SL patch and an extensive color manual.

TTM 57SL Hardware Features

Two Input Buses
PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital 2
PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital 2
All analog inputs are phono or line capable
Input Gain and Left/Right Pan controls
3-band, full cut Tone controls with Kill switches
Magnetic faders for Channel Faders and Crossfader
Non-contact magnetic position sensor technology. No travel noise - No bleed - Ever!
Independent Contour and Reverse controls
Microphone Input with Engage switch, Level control and 2-band Tone control
Three sets of Outputs, each with independent Level controls
Main Out on XLR (balanced)
Booth Out on 1/4" TRS (balanced)
Auxiliary Out on RCA (unbalanced)
Assign Program 1, Program 2 or Both to external FlexFx loop
Internal LFO Filter and Echo Effects with six possible insert points
Pre- or Post-channel faders for Program 1 and Program 2
Main Mix
Auxiliary Input Bus
Headphone Cue Monitor includes Cue Pan, Main Mix select and Level
8 Channels of Streaming Audio
16 bit / 44.1 kHz Streaming Audio
Four channels from computer
Stereo source Digital 1 and Digital 2
Four channels to computer
Stereo Record 1 and Record 2
Stereo Recording
Record 1 and Record 2 may record:
Pre- or Post-channel faders for Program 1 or Program 2
Main Mix
Auxiliary Input Bus
Vinyl / CD Control Inputs
Stereo Record 1 may be used for 4-channels of control
Select Analog 1 or Analog 2 for Control Input 1
Select Analog 3 or Analog 4 for Control Input 2
Additional "soft" mixer controls used by Scratch LIVE & internal effects
Foot switch input (Inputs on Tip and Ring; foot switch not included)
Deck 1-2 switch
Group switch
B1 - B6 programmable switches
P1 - P2 programmable Encoders with push switches
J1 - J2 programmable Joysticks with push switches
USB firmware updates
Internal universal switching power supply (100-230 VAC)
Unit size: 13.5"H x 10"W x 4"D (34.3 cm x 25.4 cm x 10.2 cm)

Weight: 8.5 lb (3.8 kg)

Shipping Size: 7.75"H x 12.75"W x 19.25"D (19.7 cm x 32.5 cm x 49 cm)

Weight: 12 lb (5.5 kg)

Scratch LIVE is the ultimate software and hardware solution for bridging the analog world of vinyl and the digital world of computer audio files. Using regular turntables or CD players, you can scratch and mix files from your Mac or Windows XP computer's CD or hard drive, add in a live mic input for scratching, and even bypass to standard vinyl if you wish. Scratch LIVE is the complete digital solution for the vinyl junkie -- take your entire collection wherever you go and leave your precious vinyl at home!

The included 12" vinyl records each have a Serato exclusive and unique control signal which allows Scratch LIVE to track the motion of the record, simulating the same movement with digital audio. Due to Serato's proprietary control scheme, the result is a feel and sound indistinguishable from playing vinyl.

The minimum operating system requirements are either a 800 MHz Mac G4 with OSX 10.3, or a 1GHz PC running Windows XP with Service Pack 2, either with 512M of ram or more.