|
|
|
THE ULTIMATE TABLETOP MIXER FOR THE PRO DJ. Harnessing the power of Numark's custom digital processing legacy, the 5000FX is a 5–channel tabletop mixer (with 3 phono, 9 line and 2 mic inputs) that allows you to control the most complex mix situations. With patented Beatkeeper™ technology, a DJ can auto–detect BPM and simultaneously manipulate a mix from 2 different sources. The unit's on–board sampler (with 30 seconds of memory) and multi–effects processing capability gives additional options, including smart loop and BPM synchronization. DJs can also scratch any audio source utilizing the unit's scratch/effect/pitch wheel. Offering superior audio effects and the most accurate BPM display on the market, the Numark 5000FX sets a new standard in tabletop mixers, delivering all the bells and whistles you'll ever need in one powerful package. - 12" tabletop configuration
- 5 input channels with 3 phono, 9 line (3 switchable to phono), and 2 mics
- Master balanced, unbalanced, XLR, 2 zone and 1 S/PDIF outputs
- Dual Beatkeeper™ units to auto–detect BPM from 2 sources
- BPM alignment of effects and loops
- Effects processor with interactive scratch/effect/pitch wheel
- Effects include: Scratch, Sonar, Chop, Echo, Delay, Filter with Vocal kill
- Pitch/Key shift, Distort with Vocoder
- 18 Second audio buffering for Scratching and Reverse Audio with Bleep effect
- Onboard sampler with 30 seconds of memory, smart looping, and BPM synchronization
- Optional rack ears available
Inputs
- Line: 10Kohm input impedance; 83mV rms sensitivity for 1.22V output
- Mic: 600 ohm input impedance unbalanced; 1.9mv rms sensitivity for 1.22V output; 200mV rms max input
- Phono: 47Kohm input impedance; 1.3mV rms sensitivity @1KHz for 1.22V output
Outputs- Line: 6.5V rms max
- Headphone: 0.5W into 47 ohm
- Distortion: less than 0.01%
Signal to Noise Ratio (maximum output || JIS-A weighted)- Line: Better than 82dB
- Mic: Better than 80dB
- Phono: Better than 72dB
Frequency Response- Line: 20Hz-20KHz ±0.5dB
- Mic: 20Hz-15KHz ±0.5dB
- Phono: ±1dB except for controlled attenuation of –3dB @ 20Hz to reduce rumble and feedback
Channel Equalizer- Bass: +6/-32dB @40Hz
- Middle: +6/-32dB @1.35KHz
- Treble: +6/-32dB @15KH
- Channel Kill: 80dB at 20Hz-20KHz
General
- Power Consumption: 24 Watts typical; 29 Watts with full headphone output
- Dimensions (W x D x H): 320mm x 355mm x 100mm
- Weight: 6.1 kgs
Sampler
- The maximum sample length is 36 seconds, total available buffer is 48 seconds, and buffer not used for sampler is used for echo, delay, scratch, reverse, and bleep effects. The sampler will automatically stop recording once the record time exceeds 36 seconds.
|
|
|
|
